It isnae the fastest bike, but it’ll pull a caravan
Weekly Update 4 – 07/08 – 14/08
Ah, the feeling of fresh tyres. It’s a strange feeling really. A cross between bum clenching and quick breathing as you try to scrub them in. Every degree of angle you exhibit brings this feeling on, coupled with the thoughts of the back end sliding out behind you as you go over too far. But once you get out to the edge of the tyre, this feeling turns to joy as you are afforded the full use of the tyre.
These feelings are enhanced ten fold if it’s wet. Which it just so happened to be the day I picked the bike up.
Now if you have got this far and have no idea what I am talking about then,
When a tyre is made the inside of the mould is coated in a release agent, which allows the tyre, once moulded to be freely ejected from the mould. Without it the tyre would be a pain in the arse to get out of the mould, and when you are making millions of these, you need a quick way to get the tyre out and the mould shut for the next tyre to be made…anyway, this release agent just so happens to be extremely greasy. So that’s the reason most, if not all motorcycle dealers, servicers and outlets will tell you to “take it easy for the first 100 miles or so” as you leave.
For a great example of why your told to take it easy, see exhibit A:
Now, when I last got a back tyre on the GSR (a Bridgestone BT-021 for those who are interested) I picked it up from Stuart and he said the famous words, “take it easy.”
As I bid adieu he started talking to the next bloke who was waiting and off I went. I pulled out of the garage and started heading along the road, and gave what I thought was a good level of throttle given the situation. Next thing I know the bike is snaking about and the redline is being kissed. “BRAAADADADADADADADADA” up the road. I could just imagine Stuarts face.
I told you that so I could tell you this.
I got the new tyre on the MT on Saturday there, a Metzeler Z6. Now those of you who have read every post on here (thanks Rossy Boy) will know how I don’t ever mix brands of tyre. By this I mean I don’t have say a Dunlop on the front and a Michelin on the rear. It just doesnt work.
Now when I called Stuart to get him to order a tyre he tried to get me a Pirelli Diablo Strada, the same as both my tyres were before the flat rear. He called back shortly after and said that he couldn’t get a Strada rear and suggested the Metzeler Z6… I said “you told me not to mix brands” and he said that basically Pirelli own Metzeler and the Z6 and Strada are basically the same tyre, same profile, just slightly newer tech in the Strada than the Z6.
If Stuart says its ok, it’s ok.
Saturday I headed down and it was wet (great) and there it was, fresh shiny new tyre. We got chatting about various bikes and his race bike was sitting there. I moaned about how the GSR needs the crap revved out it if you want to go somewhere instantly. He agreed saying his R6 race bike needs a lot of rpm before he goes places, whereas the MT is just BOOM you are off.
“Aye, it isnae the fastest bike but it’ll pull a caravan” he said, I burst out laughing. I’ve never heard torque explained that way before much to my amusement.
So we talked some more and I mentioned the unfortunate situation where in order for Stuarts business to be thriving, people need to be falling off their bikes. He laughed agreeingly. Is that a word? Agreeingly. He laughed in a way to suggest that he agreed with my statement.
Stuart you see is owner of Jackson’s Bikes, the place to go if you need absolutely anything done to your bike…unless you live outside Scotland. There are some shockers in his garage I tell you. He was showing me a bike that hit the back of a bus and the engine casings were split as if someone had wanted to show a section of the engine. Clean through. Unbelievable.
Anyway he parted with the take it easy line and I mentioned my last visit. He burst out laughing saying that he was talking to the waiting guy and heard me redlining it up the road. He smacked his forehead in a “oh no what are you doing…” way and was laughing.
So off I went with this insane torque machine, wet roads and fresh greasy back tyre on. It was ok really, I took it easy but taking any kind of corner on new tyres is always a shaky one. By the time I get round to changing my tyres they are usually well squared off/bald. This means more force is needed to turn the bike, to get it over the edge or lip of the now flat area. When a new tyre is on there’s absolutely no resistance and the bike falls to the side. It’s quite shocking and I always get a “oh shit somethings wrong” instant reaction but then realise it’s how it’s meant to be… Maybe I should change my tyres more often. ..maybe not, at £108.63 a piece I don’t make a habit of it.
Anyway, as the week draws to another speedy close the rain is falling like one of those rainfall shower heads….hang on. I need to get me either a one piece waterproof oversuit or at the very least, a pair of brieks. I am growing tired of getting off my bike only for all the water that has collected in my pants to go shooting down my legs and in to my boots. It gives a somewhat bitter end to the journey.
YamYamBiker.com is steadily growing in popularity and visibility. By steady I mean I have a steady view stat of around 170 folk a day… I would love for it to get a bit more popular, so any hints on what you would like to read about would be appreciated, or indeed what you don’t like reading about.
To help me on my way I have been included in various “TOP ###” motorcycle blog posts, including the ones below. Many thanks for that and I hope people start finding and subsequently enjoying YamYamBiker.com.
All the best for the coming week all,
Gordon
